Ei3014 Heat Alarm

The Ei3014 is a mains powered Heat Alarm ideally located in the kitchen, utility room, garage or in areas which are not suitable for a Smoke Alarm.  A Heat Alarm should be connected to a Smoke Alarm to ensure early warning.

  • Fast acting class A1 thermistor
  • 230V AC supply with rechargeable lithium battery back up
  • SmartLINK compatible
  • AudioLINK data download
  • Easi-fit base
  • Hardwire interconnect
  • Wireless interconnect capability
  • Large Test/Hush button
  • Memory feature
  • Integrated piezoelectric sounder

BS 5446-2:2003

Categories: , Tag:

The Ei3014 is a Heat Alarm with a Class A1 heat detection. It is ideal for rooms where smoke Alarms cannot be installed without the risk of excessive nuisance alarms like the kitchen, garage, etc...

The Ei3014 can only be used as part of a fire detection system ie interconnected with Ei Electronics mains powered Multi-Sensor Fire or Smoke Alarms. It can be interconnected either by hard-wire or wirelessly (using the EI3000MRF module). Up to 20 devices can be interconnected.

The AudioLINK feature facilitates acoustic download of the Alarm parameters and status using the Ei Electronics AudioLINK app.

The Ei3014 is powered by 230V AC mains. In the event of mains failure, the rechargeable 10 year built in tamper-proof lithium cells will provide up to 3 months power supply in the case of a wireless RF installation or up to 6 months in any other case.

The Ei3014 self-checks its sensor, battery voltage and internal circuitry every 48 seconds. Any fault condition found will be indicated by a combination of yellow LED flashes and chirps.

The memory feature allows an Alarm that has previously activated to be easily identified (through the red flashing LED).

The Ei3014 fitted with the Ei3000MRF module can be connected to the SmartLINK Cloud Portal via the installation of the Ei1000G Gateway enabling live monitoring, details of system installations and notifications of Alarm activations and system events via alert, text message or e-mail.

Sensor:Thermistor (Class A1 Detection - trigger temperature 58°C ± 4°C)
Supply voltage:230V AC. 50Hz
Power consumption:0.25W (standby)
Battery back-up:Tamper-proof rechargeable lithium battery back up
Interconnectable:via hardwire (wireless optional with Ei3000MRF)
Sound level:85 dB(A) at 3m
Button Test:Checks sensors, electronics and horn
Silence function:Silences alarm for 10 minutes
Silences fault chirps for 12 hours
Live monitoring:Via the Ei3000MRF module & the Ei1000G Gateway
Data download:Via the AudioLINK App
Visual indicators:Green LED: Power
Red LED: In alarm (if coincides with horn sounding), in hush mode or memory
Yellow LED: Fault
Memory feature:Records last alarm event
End of Life:Audible and visual indicators (3 yellow flashes and 3 beeps)
Normal Operating and Storage Temperature Range: -10°C to 40°C
Normal Operating and Storage Humidity Range: 
15 % to 95 % Relative Humidity
Plastic material:UL94VO flame retardant
Fixing:Screw fixings and Easi-fit mounting plate supplied


  • Product: 150mm x 66mm
  • Package: 180mm x 155mm x 70mm


  • Product: 312g
  • Product + Packaging: 378g
Warranty:5 years

Product Manual

Product Datasheet