The Ei144e Heat Alarm is fitted with a fast acting Class A1 sensor to quickly sense heat build-up from fires. Powered by 230V AC with a 9V user replaceable Alkaline battery backup to ensure continuous operation (up to 3 years) in the event of mains failure.
The Alarm is supplied with the "Easi-fit" base to facilitate quick and simple installation, combined with easy detector head removal and replacement. The Easi-fit base automatically connects both mains power and battery as the detector head slides on.
The Ei144e can only be used as part of a fire detection system if interconnected with Ei Electronics mains powered Smoke Alarms. It can be interconnected via hardwire to communicate with compatible Ei Alarms and accessories. Up to 20 devices can be interconnected. Interconnecting the Ei144e with the Ei1529RC enables the user to Locate, Silence and Test the Alarms remotely.
The Alarm automatically monitors the battery every 40 seconds. If it is depleted it will give a short beep every 40 seconds.
The large Test and Hush button allows the user to check the operation of the Alarm. This will check the sounder, battery voltage and internal circuitry.
The memory feature allows an Alarm that has previously been activated to be easily identified. This is indicated by 2 red led flashes every 40 seconds for 24 hours (after the event).
