Ei3028 Heat & Carbon Monoxide Alarm

The Ei3028 is a Mains powered Alarm that contains two separate sensing elements – CO and heat – giving it the ability to detect toxic levels of Carbon Monoxide as well as dangerous levels of heat. It is ideal for kitchens or in rooms where both, a heat Alarm and a CO Alarm, are normally required.
  • Contains both CO and heat sensor
  • Mains powered with 10 year rechargeable Lithium battery back up
  • SmartLINK compatible
  • AudioLINK data download
  • Fault hush function
  • Easi-fit base
  • Hardwire interconnect
  • Wireless interconnect capability
  • Large Test/Hush button
  • Memory feature
EN50291-1: 2018
BS 5446-2:2003

The Ei3028 is a dual Heat and Carbon Monoxide (CO) Alarm. It contains a proven electrochemical CO sensor to detect the presence of toxic levels of Carbon Monoxide as well as an independent fast acting Class A1 Thermistor sensor to detect dangerous levels of heat, hence eliminating the need for installing 2 products in areas where both types of detection would be required.

The Ei3028 is powered by 230V AC mains. In the event of mains failure, the rechargeable 10 year built in tamper-proof lithium cells will provide up to 3 months power supply in the case of a wireless RF installation or up to 6 months in any other case.

The AudioLINK feature facilitates acoustic download of the Alarm parameters and status using a smart app.

The Ei3028 can be interconnected via hardwire or wirelessly (through the EI3000MRF module) enabling it to communicate with compatible Ei Alarms and accessories. Up to 20 devices can be interconnected.

During an alarm, “Fire” or “CO” will flash on the Alarm to indicate what has been detected. The flash rate of the red LED is dependent on the type of detection and in case of CO, on the level detected.

The Ei3028 self-checks its sensors, battery voltage and internal circuitry every 48 seconds. Any fault condition found will be indicated by a combination of yellow LED flashes and sound beeps.

The memory feature allows an Alarm that has previously activated to be easily identified (through the red flashing LED).

The Ei3028 fitted with the Ei3000MRF module can be connected to the SmartLINK Cloud Portal via the installation of the Ei1000G Gateway enabling live monitoring, details of system installations and notifications of Alarm activations and system events via alert, text message or e-mail.

Sensor: Electrochemical & Thermistor (Class A1 detection. Trigger temperature 58°C ± 4°C)
Supply voltage:230V AC. 50Hz
Power consumption:0.25W (standby)
Battery Back-up:Tamper-proof rechargeable lithium battery back up
Interconnectable:via hardwire (wireless optional with Ei3000MRF)
Sound level:85dB(A) at 3m
Button test:Checks sensors, electronics and horn
Silence function:Silences alarm for 10 minutes if alarm triggered by Heat or once for 4 minutes in case of CO event if <150ppm detected.
Silences fault chirps for 12 hours
Live monitoring:Via the Ei3000MRF module & the Ei1000G Gateway
Data download:Via the AudioLINK app
Visual indicators:Green LED: Power
Red LED: Pre-alarm (CO event only), in alarm (if coincides with horn sounding), in hush mode or memory
Yellow LED: Fault
Memory feature:Records last alarm event
End of Life:Audible and visual indicators (3 yellow flashes and 3 beeps)
Normal Operating and Storage Temperature:
-10°C to 40°C
Normal Operating and Storage Humidity Range:
15% to 95% relative humidity
Plastic material:UL94VO flame retardant
Fixing:Screw fixing and Easi-fit mounting plate supplied
  • Product: 150mm x 66mm
  • Packaged: 180mm x 155mm x 70mm
  • Product: 318g
  • Product + packaging: 384g
Warranty5 years

Product Manual

Product Datasheet