Ei412 RadioLINK Remote Control Switch

The Ei412 is a RadioLINK battery powered remote control switch designed to be used with Fire and CO Alarm Systems.

  • 10 year Lithium battery
  • Wireless Interconnect
  • 3 functions:
    • Test
    • Locate
    • Silence
  • Fire alarm, CO alarm and RF red LED indicators
  • Unique house coding feature
  • Memory feature

Compliant with Radio Equipment Directive 2014/53/EU

The Ei412 is a wall mounted RadioLINK remote control switch for use with combined Fire and CO Alarm Systems. It is powered by a 10 year lithium battery.

The Ei412 is designed with 3 switches that perform the following functions:

  • Test : Allows the user to test all the interconnected Alarms at once from a convenient point rather than having to press the test button on each Alarm.
  • Locate : If the Alarms are sounding, pressing the Locate Switch silences all but the originating Alarm, thus allowing easy identification of the source of the alarm and of correct course of action.
  • Silence : (to be used after locating the originating Alarm) Allows the user to silence the originating Alarm for 10 minutes (if smoke/heat Alarm) or 4 minutes (if CO Alarm).

The Ei412 communicates wirelessly with compatible Ei Electronics Alarms and accessories. When the Ei412 receives an alarm signal, the “FIRE” or “Carbon monoxide” indicator will flash to indicate which type of Alarm is the originator and enable the occupant to quickly take appropriate action. Any RF communication are indicated by the red LED at the right of the FIRE indicator. Up to 12 RF devices can be interconnected.

The house coding feature confines the RF communication to designated RF devices only, thereby avoiding the inadvertent activation of neighbouring Alarm RF systems.

If the RF indicator flashes once every 40s it indicates that it has reached its end of life and needs to be replaced.

Product Life:10 years
Supply Voltage:3V Lithium battery (non-replaceable)
RF Frequency:868MHz band (1% duty Cycle)
RF Power:+5dBm
RF Range:> 100 Metres in free air
Protocol type:Mesh architecture
RF Protocol:RadioLINK
System size:Up to 12 RF devices
Visual indicators:Red LED: On power up, Fire alarm, RF communication, CO alarm, memory and end of life
Memory:Identifies previously triggered alarms
Normal Operating and Storage Temperature Range:-10°C to 40°C
Normal Operating and Storage Humidity Range:15 % to 95 % Relative Humidity
Plastic material:UL94HB
Fixings:Screw fixings and surface mount box supplied
Product: 88mm x 88mm x 46mm
Packaged: 90mm x 90mm x 50mm
Product only: 200gr
Product + Packaging: 220gr
Warranty5 years

Product Manual

Product Datasheet