Ei144RC Heat Alarm

The Ei144RC is a mains powered Heat Alarm with a 9V alkaline battery backup.  It is ideally located in the kitchen, utility room, garage or in areas which are not suitable for a Smoke Alarm.  A Heat Alarm should be connected to a Smoke Alarm to ensure early warning.

  • Fast acting class A1 thermistor
  • 230V AC supply with 9V battery back up
  • Easi-fit base
  • Hardwire interconnect
  • Remote Test, Locate and Silence compatible
  • Large Test/Hush button
  • Memory feature
  • Integrated piezoelectric sounder

BS 5446-2:2003

Categories: , Tag:

The Ei144RC Heat Alarm is fitted with a fast acting Class A1 sensor to quickly sense heat build-up from fires. Powered by 230V AC with a 9V user replaceable Alkaline battery backup to ensure continuous operation (up to 3 years) in the event of mains failure.

The Alarm is supplied with the "Easi-fit" base to facilitate quick and simple installation, combined with easy detector head removal and replacement. The Easi-fit base automatically connects both mains power and battery as the detector head slides on.

The Ei144RC can be interconnected via hardwire to communicate with compatible Ei Alarms and accessories.  Up to 12 devices can be interconnected.  Interconnecting the Ei144RC with the Ei1529RC enables the user to Locate, Silence and Test the Alarms remotely.

The Alarm automatically monitors the battery every 40 seconds. If it is depleted it will give a short beep every 40 seconds.                                          

The large Test and Hush button allows the user to check the operation of the Alarm. This will check the sounder, battery voltage and internal circuitry.  

The memory feature allows an Alarm that has previously activated to be easily identified. This is indicated by 2 red led flashes every 40 seconds for 24 hours (after the event).

Sensor: Thermistor (Class A1 Detection - trigger temperature 58°C ± 4°C)
Supply voltage: 230V AC. 50Hz
Battery back-up: Replaceable 9V alkaline battery back up
Sound level: 85 dB(A) at 3m
Button Test: Checks sensor, electronics and horn
Visual indicators:
  • Green LED: Power
  • Red LED: Self-check, alarm, hush & memory
Memory feature: 2 red flashes every 40 sec to indicate a previous alarm activation
Normal Operating and Storage Temperature Range: -10°C to 40°C
Normal Operating and Storage Humidity Range:
15 % to 95 % Relative Humidity
(non-condensing)
Plastic material: UL94VO flame retardant
Fixing: Screw fixings and mounting plate supplied
Dimensions:
  • Product: 150mm x 66mm
  • Package: 180mm x 155mm x 72mm
Weight:
  • Product: 300g
  • Product + Packaging: 352g
Warranty: 5 years

Product Manual

Product Datasheet