Ei103R Low Voltage Heat Alarm

The Ei103R is a Heat Alarm designed to connect to a panel for its low voltage power supply (10.2 – 14V DC).  This Alarm is fitted with volt free relay contacts that can be used to switch an external device.  It is best suited for kitchens and garages.

  • Fast acting class A2 thermistor
  • 10.2-14V DC supply
  • 1 Volt-free contact output (No/NC)
  • Hardwire interconnect
  • Test button
  • Integrated piezoelectric sounder

BS 5446-2:2003

Categories: , Tag:

Heat Alarms are designed for use in areas where optical or ionisation smoke Alarms would be susceptible to nuisance alarms.

The Ei103R Heat Alarm is designed to connect to a panel for its low voltage power supply (10.2-14V DC) but also as a trigger via a built in relay. When a high temperature is detected ( 58°C ± 4°C), the horn will sound and the relay will switch.  

The Ei103R may operate as a standalone Alarm or may be hardwire interconnected  to other Ei low voltage Alarms from the same range.  In an interconnected system, an Alarm sensing fire will cause all others to alarm and switch contact (depending on installation configuration). Up to 12 Alarms from the same range can be interconnected.

The Test button allows the user to check the operation of the Alarm.  This will check the sounder, internal circuitry and relay.  When the Test button is pressed, the horn will sound within 10 seconds and the relay contacts will change over about 4 seconds after the horn sounds.  All interconnected Alarms should sound within 10 seconds.  When the button is released, the horn will stop sounding and the relay contacts will change back 4 seconds later.

Sensor: Thermistor (Class A2 Detection - trigger temperature 58°C ± 4°C)
Product life: 10 years
Supply voltage: 10.2-14V DC
Relay contacts:
24V, 1A resistive, NO/NC
Interconnection: via Hardwire
Sound level: 85 dB(A) at 3 meters
Button Test: Checks sensors, electronics, horn and relay contacts operation
Visual indicators:
Red LED:  Power and alarm
If the red LED flashes and the alarm sounds but there is no fire/heat present,
the sensor is faulty and the unit needs to be replaced.
Normal Operating and Storage Temperature: 
-10°C to 40°C
Normal Operating and Storage Humidity Range:  15% to 95% relative humidity
Plastic material: UL94 HB
Fixing: Screw fixing and mounting plate supplied
Dimensions:
Product: 130mm x 115mm x 55mm
Packaged: 143mm x 150mm x 60mm
Weight:
Product: 140g
 Product + packaging: 178g
Warranty: 5 years

Product Manual

Product Datasheet