SAB300 – Clear Strobe Light

The SAB300 is a compact clear strobe light that can be used indoors or outdoors.

Features :

  • 230V AC supply
  • Activated by a relay module
  • Simple “First Fix” installation
  • IP65
  • 5-year guarantee


Categories: ,

The SAB300 is a compact clear strobe with a modern sleek appearance powered by 230V AC.

The strobe is fitted with a diffuser for greater visibility and spread of light.

The terminal block has a L-live and N-neutral connection only.  For the strobe to flash when a fire or CO event is detected, it needs to be connected to the NO contact of an Ei Electronics relay (eg. Ei428, Ei128R, Ei128RBU) interconnected with the Alarm system (as per below wiring schematics).

Once the terminal block of the Xenon strobe part is connected to the relay, simply fit on base by twisting it on.  It can then only be removed with a screw driver due to is vandal-resistant safety locking mechanism.

The strobe will now give a visual warning that the alarm system has been triggered.

The 27mm deep base has 2 x 4.5mm slots to screw it in place.  It is supplied with a seal and grommet.


Supply voltage:

 230V AC





Flash rate:


Normal Operating Temperature Range: 

-20°C to 40°C

Plastic material:

UV Stabilised Polycarbonate

Cable entries:

4 Knockouts along the perimeter and one in the center of the base through a grommet


Up to 1.5mm2 cables

IP Rating




·         Product: 85mm x 81mm

·         Packaging: 90mm x 90mm x 85mm



·         Product: 150gr

·         Product + packaging: 180gr


5 years

Product Manual

Product Datasheet